Welcome to our thorough guide on effectively using a hot melt glue gun one step at a time. No matter if you are a trusty craftsman or a DIY addict, it is essential to be able to use a glue gun for multiple creations or repairs. In this article, we shall be unlocking the knowledge and skills to help you operate a hot-melt glue gun more or less like a professional. Know that we shall go over the safety measures along with the proper use of a hot melt glue gun, how to choose the perfect glue sticks, and how to use them innovatively. Let us begin by learning how to unleash the maximum of your hot melt glue gun truly.
How Do You Use a Hot Melt Glue Gun Safely?
As in all situations, controlling the scenario when utilizing a hot melt glue gun is essential to minimize the chances of an accident. For this reason, the following points are relevant:
- Protective Equipment: Close-fit gloves should always be worn so that hands don’t get burned while using the glue gun and hot glue.
- Workspace: A glue gun should be placed on a silicone mat or any other working surface to shield the workspace from damage.
- Proper Usage: The glue gun should only be held by the handle, and the heated nozzle should not be touched. The trigger hand should be permanently removed from the glue gun when not in use.
- Power and Temperature Settings: The glue gun should always have a proper power source. Before using it, it should be given ample time to reach the temperature at which it was intended to function.
- Selection of Glue Sticks: Glue sticks designated for hot melt glue guns should always be used. They should also match the ideal size and temperature for the glue gun.
- Unloading: When finished with the glue gun, unloading all the remaining glue sticks is essential to avoid clogging the device. Further, it is advisable to set the glue gun aside and let it cool down before putting it away or changing glue sticks. Removing leftover glue sticks will maintain the gun’s functionality.
Safety should typically be the first and foremost priority, even with hot melt glue guns being as multifunctional as they are. As long as these precautions are maintained, using hot melt glue guns is safe and secure for all projects and repairs.
What Safety Precautions Should You Take?
Hot melt glue guns should be cautiously used to avert accidents and injuries. Here are some essential safety precautions to follow:
- Protective Gear: Wear heat-resistant gloves to safeguard your hands from hot glue. Safety goggles or glasses can protect your eyes in case of splatter.
- Work Area: Ensure that the room is adequately ventilated and well-lit. Also, using a heat-resistant mat or surface is good practice to protect the office table from getting burnt.
- Power and Cords: Ensure the hot glue gun is connected to a properly grounded power source before use. Cords should be placed strategically to avoid accidental tugging or getting tangled while working.
- Handling the Glue Gun: Using a glue gun is relatively straightforward. Hold it firmly while ensuring your fingers are not placed too close to the nozzle. Likewise, avoiding touching the more sensitive parts of the glue gun, such as a hot nozzle, should also be practiced.
- Glue Stick Selection: As the manufacturer recommends, only glue sticks compatible with the glue gun should be used. Using glue sticks that have been stained or damaged should never be an option, as they risk clogging the gun or disrupting the glue.
- Cooling and Storage: Before storing the glue gun or changing glue sticks, ensure it has cooled down completely. Unplugging the gun and correctly unloading any remaining glue will also ensure the glue doesn’t get lodged inside and that the weapon isn’t thrown up.
It’s worth noting that a hot melt glue gun must be used with care because safety is a top priority. By taking these precautions, you can confidently and safely use a glue gun for many tasks.
How to Handle the Nozzle Correctly
For wielding the nozzle of a hot glue gun appropriately, these practices should be followed:
- Avoid Contact: Never use direct contact with the nozzle of hot glue guns as they get overheated. Always be careful so no burns or injuries are sustained.
- Maintain Distance: Keep your hands or other objects at an adequate distance from the nozzle to prevent accidental contact. You should keep a distance of at least one inch to avoid burns.
- Use Protective Gear: You may use gloves with a hot glue gun. Gloves provide insulation from the heat and, as a result, more protection.
- Mind the Angle: The glue gun must be kept at a particular angle to prevent the glue from spewing out from the tip uncontrollably. A 45-degree angle should be more than sufficient for appropriate usage.
- Clean the Nozzle: It is essential to clean the glue gun, especially the nozzle, from time to time to avoid gum that clogs or hinders glue flow during application.
Proper nozzle handling is essential for your safety and the effective operation of the hot glue gun. After reading the general guidelines below, feel free to use the nozzle while handling it safely and productively.
Common Mistakes to Avoid
When using a hot glue gun, a few significant blunders can be avoided by using the tool properly and without any harm. Let’s discuss some points to ponder:
- Selecting inappropriate Temperature: Nonmatching settings may result in problems like nonstick, wherein the materials have adhered poorly, or melted glue. Never forget that an ideal temperature is required for adhesion, depending on what materials you are using.
- Applying an Excessive Amount Of Bonding Agent: Applying large amounts will result in a lot of Bonding Agent that may not be used and may get in hands, which can also cause poor bonding. Therefore, an ideal quantity of bonding agent should be used.
- Trotting Instead Of Giving Time: When using a hot glue gun, it is imperative that the Binding Agent used be dry and not trotted. There are ideal conditions wherein a glue must be dried and not wet; otherwise, it will result in weak binding. Always use appropriate glue for the required purpose.
- Failure to Adhere to Safe Operating Procedures: Besides its numerous features, the hot glue gun can also be a potent and dangerous tool for the user since it can reach sizzling temperatures that may leave burns on the user’s body or skin. Safety measures are essential when working with the glue gun, such as wearing protective gloves and not touching the hot nozzle with bare hands.
If you avoid these mistakes while using a hot glue gun, you will be able to use it more precisely and safely, which will ultimately give you better results in your projects. Check the manufacturer’s manual before using the product to get specifics on the use and maintenance of the hot glue gun.
What Are the Basics of Operating a Hot Glue Gun?
How to Heat the Glue Gun Properly
To ensure optimal operation and adhere to safety standards, it is essential to heat your glue correctly. To do so, one must follow the following set of instructions:
- Picking the correct temperature: The intensity of the glue gun will depend on the instructions provided by the manufacturer. If you are sticking different items together, be aware most rarely come with interchangeable temperature settings. If your glue sticks have varying types, ensure you have the right temperature.
- Inserting the glue stick: Before inserting the glue stick, make sure you place it suitably in the aimed chamber, which is located at the rear of the glue gun. Before doing so, ensure you can use the gun and that the gluing mechanism fits perfectly.
- Plugging in and turning on: Switch the power supply and prepare the tool. Almost all glue guns contain tiny lightbulbs that indicate when the tool is heating. The tool can take a while, so wait a couple of minutes until the light goes off.
- Preheating time: For the glue gun’s heating mechanism to work efficiently, use your tool well after the threads have melted. Always refer to the manufacturer’s instructions to determine how long it takes to preheat properly.
- Test the glue: Squeeze the gun’s trigger while applying a small amount of glue to a sample material. This process ensures that the glue flows smoothly and that the temperature of the glue is optimal for the construction.
So, heat the glue gun safely and effectively. Also, ensure you use the weapon safely by wearing gloves and not applying direct contact to the heated nozzle. Any temperature violations can significantly interfere with the security and efficiency of your future craft and repair works.
Loading and Unloading Glue Sticks
Without a doubt, the effective use of a glue gun depends on the correct loading and unloading of glue sticks in the tool. Here is a guideline on how it should be done:
- Choose the Correct Glue Stick: A specific glue gun requires a certain size and a glue stick with a particular melting temperature. For further instructions, refer to the glue’s package. Unpackaged sticks can also be found through the manufacturer.
- Preheat the Glue Gun: Depending on the build of your glue gun, plug it in to allow it to preheat. As a result, the glue stick to be inserted will melt evenly and with little resistance.
- Insert the Glue Stick: Ensure your glue gun does not contain any glue sticks by peering into the weapon’s muzzle. In the case where it does, the remaining part can be pulled out by pushing it toward the front opening or through the unloading system of the gun. When the firearm is devoid of glue, feed it into the back of the gun to prevent any glue from spilling out.
- Feed the Glue Stick: After inserting the glue stick into the chamber, apply pressure to the nozzle while ensuring some glue oozes. This will confirm that the glue is moving correctly.
- Lock the Glue Stick: The next step is to tighten the glue stick inside the heating chamber of your glue gun by pushing it forward using the machine’s feeding mechanism or trigger.
- Eject the Glue Stick: Whenever you need to replace the glue stick or complete the job, you can eject it by reversing the action taken to wear it. For precise actions on reinserting the glue stick into the gun, consider following the manufacturer’s instructions for that particular gun.
Loading and unloading glue sticks requires general safety precautions, as the gun can overheat. Glue guns should be handled with the utmost degree of caution, as the nozzle absorbs heat. You should never aim a glue gun directly at people. Using the correct methods outlined in this guide will ensure that you never have issues with the hot glue gun.
How to Apply the Glue Correctly
Nailing the application of glue is key to ensuring reliable and sturdy bonding of the materials. By adopting the suggested measures and including the latest information from credible sources, Sue minimizes the chances of going wrong and instead seeks to suit her expectations maximally.
- Prepare the Glue Gun: Before beginning, ensure the glue gun is ready for construction or application. Please consult the glue gun manufacturer’s instructions about the approximate time needed to get sufficiently heated, as this may differ between glue gun modes and types.
- Select the Right Glue Stick: Choose a glue stick appropriate for the project and the materials you are gluing. When choosing, consider the temperature range, duration it will take to dry, and strength.
- Load the Glue Stick: Place the glue stick in the glue gun according to the manufacturer’s guidelines. Lightly press the glue stick as you place it inside the gun to ensure that it is well placed.
- Allow Proper Melting Time: Allow the hot glue stick time to melt so it reaches the right level of viscosity before being used. This should take a couple of minutes or so, and like before, it will depend on the glue gun and glue sticks being used.
- Fitting the Glue: Gently grasp the trigger of the glue gun and let loose the melted adhesive on the required portion of the surface. Start from one side and then proceed to the other side by applying glue neatly and uniformly. Furthermore, excessive application is discouraged because it leads to messy and weak bondages.
- Issuing the Bond: Link the joined surfaces together while applying pressure but still gently. This should be done after squeezing the glue. Shake lightly and leave the surfaces until the adhesive binds them firmly. Check the glue stick’s packaging instructions or contact the manufacturer for the recommended setting time.
- General Clean-Up and Safety Tips: When the task is done, or you want to apply another glue stick, the glue on another portion of the surface must be clustered in reverse order. Remember, even though it is inadvisable, one may suffer burns, so avoid direct contact with the hot nozzle. Finally, the glue gun must be stored in secure locations where it is not easily obtainable by kids or pets.
This article helps one apply glue without making too many blunders. It ensures the success of all craft and repair attempts by providing new information acquired from credible sources.
What Are the Different Types of Glue Sticks?
When to Use Low-Temperature Glue Sticks
Low-temperature glue sticks are the right choice for some applications since they don’t damage surfaces or when heat-sensitive materials are involved. Here are some instances where using low-temperature glue sticks is recommended.
- Crafts with fire-sensitive materials: Low-temperature glue sticks can be handy when working with materials that can be depleted or deformed by heat, like plastic, fabric, or foam, instead of using a high-temperature application that would damage the fire-sensitive materials.
- Activities involving children: When crafting with children, it would be better to use low-temperature glue sticks since children can easily touch hot glue and burn themselves. The temperature of the glue is lowered to limit contact with the hot glue, making it safer to use.
- Sensitive art pieces: When it comes to creating low-temperature glue sticks, they provide more ease of application, especially for sensitive art pieces, because there is a lesser chance of glue mess. This helps to enhance the quality of the bond provided.
As a precaution, I recommend verifying the manufacturer’s recommendations before starting the project to avoid wasting time in case it’s not suitable for your application.
Hot Melt vs. Standard Glue Sticks
Standard and hot melt glue sticks are two of the most preferred types of glue used with glue guns. We can differentiate the two as follows:
Hot Melt Glue Sticks:
- Composition: Hot melt glue sticks are manufactured from thermoplastic polymers that liquefy when subjected to thermal energy and become solid again upon cooling.
- Application: Glue’s melt temperatures range from 380°F to 410°F (193°C to 210°C), making it effective for bonding wood, metal, plastic, and fabric materials.
- Bond Strength: They are used where heavy-duty applications are required due to their excellent adhesion.
- Speed: Generally, they are very fast-setting sticks; solidification can sometimes take only seconds.
- Usage: They are commonly employed in industrial environments, construction applications, and applications that require strong and quick bonding of materials.
Standard Glue Sticks:
- Composition: Just like hot melts, standard glue is also made from thermoplastic polymers. The only difference is that it has a different formulation and a relatively lower melting point than hot melts.
- Application: These types of glue sticks have a melting range of about 250° to about 350°F (121° to 177°). They are suitable for wrapping crafts that incorporate paper, grabs, soft fabrics, and anything that may be heat-sensitive.
- Bonding: An average bond with a moderate and reliable strength is provided by ordinary glue sticks, making them ideal for light repairs and general crafting projects.
- Speed: Because the bond is not entirely set at once, it takes longer to fix, enabling further adjustment and more positioning before it is thoroughly set.
- Usage: Ordinary glue sticks are useful for projects such as DIY home repairs, crafts, and other delicate projects that require less heat.
When using hot melt and regular glue sticks, first consider the project’s requirements, such as the materials being glued, the strength of the bond desired, and the materials’ temperature sensitivity. It’s always wise to consider the glue manufacturers’ recommendations and instructions when using the glue gun and goat glue stick.
How Can You Use a Glue Gun for Crafts and Repairs?
Best Practices for Arts and Crafts
A glue gun can be handy for numerous arts and crafts projects; however, it is imperative to observe best practices to get the best results. Here are a few tips that you need to remember:
- Use the Right Glue Stick: The glue stick must be compatible with the materials that should be bonded and the force that should be applied between the two components. As per the project’s specific needs, one’s glue sticks might vary from an individual’s.
- Prepare the Surfaces: All surfaces that are to be glued together must be properly cleaned and dried, as well as kept free from dust and debris, to help facilitate better bonding of both components.
- Proper Heating: The glue gun should be heated according to the manufacturer’s guidelines and warmed up before usage to ensure that the glue pushes out in a melted form and binds appropriately.
- Precise Glue Application: It is recommended that glue be worked on carefully but quickly. The glue must be moved controlled, uniformly, and carefully to avoid any weakness in the bonds.
- Good Ventilation: Working in open and ventilated spaces is advised since glue guns release fumes.
- Be careful and safe: A glue gun can superficially reach dangerous temperatures, so use it with extreme care. Always use the built-in stand or place the glue gun on a heat-resistant material when not in use. Try not to touch the hot nozzle or the melted glue, as it may result in burns.
Also, remember, like any other tool, using a glue gun and hot glue becomes easy with ample practice. Do not hesitate to try out new techniques and materials for the best output. Through cautious use of the practices, it is possible to make great-looking and long-lasting crafts without compromising the activity’s safety and fun aspects.
Using the Glue Gun for Household Repairs
A glue gun is a powerful tool for making quick household repairs because it is multi-purpose and goes well with almost every type of material it is suited for. Whether the job at hand involves fixing a broken ceramic sculpture, a loose chair leg, or even trim that has become unglued, a glue gun will be of use. The following are some of the tips and methods for effectively using a glue gun when doing repairs around the house:
- Surface Preparation: Always ensure that the glue’s surface is thoroughly clean and dry with no sand or dirt on it. This strengthens the bond and promotes a longer life for the fixing.
- Choose the Right Glue Stick: Specific glue sticks can be used on different materials. If you are using glue for a household job, even a standard universal glue stick should be fine. But if you are working on a specific task that requires wood, fabric, or plastic, then there is the option of glue sticks made for those materials. In addition to being more fabric-specific, they can be Wood glue, plastic glue, etc.
- Proper Application: Always be mindful and apply glue lightly but evenly to the surface that requires glue, which must also be bonded with another surface. Hasten the movement of joining the two surfaces while also ensuring that the placement is accurate and the mounting is strong. After this key step, hold the surfaces for a couple of minutes until the glue sets. This will allow the bond to become permanent. While the glue is set, ensure the surfaces remain undisturbed.
- Take Note of Curing Times: Remember to allow the item to go through a curing process before putting it under stress due to the hot glue. For stronger joins, it may take a few hours; hence, ensure the recommended curing times are also followed.
- Bond Evaluation: Assess and evaluate the strength of the bond after repair by applying light pressure to it. If you feel it is not strong enough, either apply glue to compensate for the weakness or look for other ways to cope with it.
All in all, using a glue gun is an easy and fast way to fix up any items around them. However, users must be cautious and implement the standard safety procedures while using a glue gun, such as wearing protective gloves and ensuring the glue has reached maximum strength. Remember to also practice and exercise care so that you are able to fix the items swiftly and, more importantly, properly.
Ideas for School and DIY Projects
Have a school assignment or a DIY project and need inspiration? Don’t sweat it because we have come up with a few ideas that will surely get your creativity flowing and enable you to polish your glue gun skills further. As naturally, it is a combination of a practical aspect as well as a creative touch which gives birth to these projects, this means that one can use many different materials, techniques and practicing for several crafting abilities. Let’s hop straight into it:
- Cards and Invitations: Use your glue gun to create homemade cards and invitations, particularly for special events and celebrations. Enhance your greetings by designing them using supped-up ideas like 3D or embossed patterns, intricate designs, etc.
- A Decoration and Accessories: Use your glue gun to embellish plain vases, picture frames, lampshades, etc., and make them stylish with your creativity. With your glue gun, you can add unique detailing to run-of-the-mill items.
- Jewelry: Make custom jewelry and jewelry pieces with a glue gun, with an emphasis on word art. Instead of wasting your money on buying hair clips, earrings, bracelets, etc., craft them with beads, sequins, and more with the help of a glue gun.
- Upcycled Items: Use your glue gun to upcycle items and give them a new purpose. Make a fitting piece out of a glass jar, or redecorate bland furniture with striking fabric and trims. Repurpose ordinary materials to create wall art.
- Projects and Experiments of Science: We encourage you to use your glue gun in your school projects, science experiments, or any other activity that requires a hands-on approach. You may build models, prototypes, or structures neatly and precisely.
Safety is extremely important, however, whenever you are using a glue gun. We advise that children be kept under supervision and that all safety measures are taken. With these project ideas, you can express your creativity further and do great things with your glue gun. Have fun doing crafts!
How Do You Maintain and Clean Your Glue Gun?
How to Remove Old Glue Residue
Whenever you feel the need to get rid of old glue residue that has collected on a glue gun, I have the following suggestions:
- Prepare the Glue Gun: The glue gun must be unplugged and cooled off before cleaning.
- Inspect and Clean the Nozzle: Novice users are especially prone to glue nozzle blockage. If the nozzle is sufficiently clogged with glue, it should be selectable with tweezers or any similar object.
- Heat the Glue Gun: Remember to heat the glue gun by plugging it in. Adequate heating will cause the remainder of the glue to melt, thus creating a more favorable environment for scraping or wiping.
- Wipe the Nozzle: Use a clean and dry cloth or paper napkin to wipe the wet part. Soil particles should not be on the cloth, as they will cause skin burns and worsen the situation.
- Repeat if Necessary: For some tweeny residue, the first heat and wipe procedure would not be adequate for complete cleaning and should be repeated until the residue is eliminated.
Finally, remember that operating a glue gun can be very dangerous and safety is the most important aspect. Therefore, closely follow the instructions provided by the glue gun maker.
Steps to Clean a Glue Gun Nozzle
Maintenance of a glue gun is broad. However, one of its most important aspects is cleaning the glue gun’s nozzle. The reason why a user might need to clean the nozzle is to maximize its effectiveness. To put it simply, here is how I would advise cleaning the nozzle:
- Cooling the Glue Gun: Before you use the nozzle and wish to begin cleaning it, ensure that the glue gun has cooled down completely. This helps when cleaning the glue gun nozzle, as this technique aids in easing slight unintentional burns.
- Cleansing the Nozzle: When the gun has heated up, carefully inspect the nozzle and the base for any glue buildup. If there are any noticeable glue chunks, use tweezers or a similar tool to cut them off.
- Heating the Gun: Ensure that the glue gun is plugged in and heated for a prolonged time. The heat helps loosen the glue and remove glue residue.
- Cleaning the Surface: Only a lint-free cloth or paper towel should be used to clean the tip of the glue nozzle, as the glue residue must not be rubbed off too roughly. Also, refrain from self-burns while doing so, as the tip of the glue nozzle is still slightly hot.
- Reiteration if Needed: Sometimes, the tip might still be dirty due to stubborn glue residue. In this situation, heating the nozzle up and cleaning it can be done repeatedly until all the stubborn glue residue has been removed.
Lastly, remember to use a glue gun while wearing appropriate safety gear and always follow the guidelines provided with the gun to avoid any mishaps.
Proper Storage for Next Time You’re Using the Glue Gun
Properly storing your glue gun is extremely important to ensure it lasts for a long time and that the glue does not spill or get damaged. Here are a few methods to help you properly store your glue gun :
- Unplugging the Glue Gun: It is advisable to unplug the glue gun after use so that it does not heat and cause the glue to leak.
- Letting Your Glue Gun Cool: Always give your glue gun enough time to cool down before you store it; otherwise, it might become a hazard.
- Using Heat-Resistant Stands: To avoid damaging your working area, use a heat-resistant stand or any heat-resistant material and place your glue gun on it.
- Dry and Safe Place: Keep your glue gun in a dry place away from moisture, dust, and sunlight. This will ensure that it remains functional and able to work properly.
- Inspecting the Cord and Plug: Prior to storing the glue gun, check the power cord and plug for damage. If damage is found, it is ideal to get it fixed before attempting to use the glue gun again.
Adhering to the abovementioned points will ensure that your glue gun remains in a good state and can be used properly.
Frequently Asked Questions (FAQs)
Q: What safety measures should be considered when using a hot glue gun?
A: Store the glue gun on its stand when it’s not in use, wear gloves while using it, and don’t touch the nozzle directly when it’s in use. Store it away from water and any other combustible materials. Low-temperature glue guns are the preferred option for kids or beginners.
Q: How do I install the glue sticks?
A: First, place the glue stick into the rear end of the gun and apply light force until you feel moderate resistance. While using the gun, you must push the glue stick to make the glue flow constantly. Towards the end of use, when the stick has nearly finished, insert a new glue stick behind the old one to eliminate any glue stuck in the gun.
Q: Does heat affect the glue significantly, and how long does it take to set?
A: In most cases, the glue sets in around twenty to sixty seconds, but to increase the bond’s strength, you should allow it to cool off for a few minutes. The time to set may differ slightly depending on the type of material used, the temperature, and the amount of glue used.
Q: What are some examples of DIY projects that employ hot glue?
A: The hot glue gun is relatively easy to work with, making it multifaceted regarding the projects one can undertake. It can be used for crafting, repairing home items, working with fabric, or even doing woodworking. It is ideal for gluing decorations, making three-dimensional models, temporary joints in woodwork, and rapid fixes in other articles around the house. Hot glue is a perfect material for school projects and making personalized decorations.
Q: How is a hot glue gun cleaned?
A: Never use a hot glue gun without ensuring it is cool and unplugged. The easiest way to do this is to leave it idle and cool it down completely, and then try to polish the ring by gently using a heat-insulated tool to scrape the edge away. If you feel that scrap would not work, a better option is to heat the gun slightly and wipe the tip with a thermally insulated cloth. In this case, always unplug the gun before cleaning it.
Q: What stains can hot glue work on perfectly?
A: Fabric, wood, paper, and certain types of plastic are the best materials for hot glue, as they function on stained surfaces. Hot glue can also stick well on ceramics, glasses, and metals, but it may have problems sticking on very smooth or oily surfaces. Clean and dry surfaces ensure the best possible glue application.
Q: How do you regulate the glue exiting from its gun?
A: Pulling the handle of the gun or pulling the trigger will control the glue flow. The more pressure you apply, the more glue will flow out. By practicing with a glue gun on waste paper, one can learn how much pressure to apply. And remember, you don’t want to waste everyone’s time with aesthetics, so start with a little and add more later if you need more.
Q: Is there a hot glue gun available that does not have cords and is also portable?
A: Luckily, a cordless hot glue gun that is also portable is available. These glue guns run on batteries, making them easy for outdoor projects or when there is not enough access to electric sockets. Cord models are still superior. However, these types of glue guns may also be more expensive due to their portability.
Reference Sources
1. An Analysis of Thermal Degradation of Hot Melt Pressure-Sensitive Adhesive (PSA) Using Atomic Force Microscopy and Infrared Spectroscopy
- Authors: H. Duan, B. Strohmeier, & Yunli Fang
- Publication Date: July 22, 2022
- Summary: The authors employed sophisticated microscopy methods to study how thermal heat affects the properties of hot melt thermosetting pressure-sensitive adhesives during manufacture. The paper elaborates on how problems like low adhesion and too much ooze can occur due to immoderate heating.
- Methodology: Atomic force microscopy and infrared spectroscopy techniques were utilized herein to assess the thermal degradation processes of hot melt PSAs(Duan et al., 2022, pp. 2490–2491).
2. Hot-Melt Adhesives: their Principles, Designs and Applicability – A Review
- Authors: Swaroop Gharde, G. Sharma, B. Kandasubramanian
- Publication Date: March 1, 2020
- Summary: This review extensively focuses on the principles of hot-melt adhesives, their formulation, and their use in different sectors. It also discusses the benefits of hot-melt adhesives, especially their effectiveness, efficiency, and time-saving nature.
- Methodology: The authors performed a detailed investigation of existing literature to compile an overview of hot melt adhesives’ essential properties and functions and an encouraging approach to their use in various situations(Gharde et al., 2020).
3. Thermogravimetric analysis of glue–welded joints using different adhesive materials
- Authors: A. Konoplin, N. Baurova
- Publication Date: September 1, 2021
- Summary: This study focuses on glued joints welded using different kinds of glues, including hot melt glue. It analyzes the effect of temperature transitions in glued joints as modified by the viscosity of adhesive materials.
- Methodology: The authors applied the infrared thermography technique to glue-welded joints to determine temperature transitions and compare different adhesive materials (Konoplin et al., 2021).